dsr6v600p5 document number: ds35211 rev. 5 - 4 1 of 5 www.diodes.com october 2013 ? diodes incorporated dsr6v600p5 powerdi is a registered tradema rk of diodes incorporated. new product part obsolete obsolete ? part discontinued 6a diodestar rectifier powerdi ? 5 product summary v rrm (v) i o (a) v f (v) t rr max (ns) q rr typ. (nc) 600 6 3.0 23 135 description and applications this diodestar rectifier has been optimized for power factor correction circuits operating in continuous conduction mode (ccm). it is also suitable for use as a re -circulating diode in high intensity discharge lighting. ? ccm power factor correction ? high intensity discharge lighting ? motor control features and benefits ? optimized for q rr and t rr to minimize diode reverse recovery losses in continuous conduction mode (ccm) power factor correction circuits ? soft switching, low emi ? 175 c maximum operating junction temperature ? thermally efficient, small form factor package enables higher density designs. ? off board profile of 1.1mm, ideal for use in low profile applications ? lead free finish, rohs compliant (note 1) ? ?green? molding compound (no br, sb) mechanical data ? case: powerdi ? 5 ? case material: molded plastic, ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: finish - matte tin annealed over copper lead frame. solderable per mil-std-202, method 208 ? weight 0.093 grams (approximate) ordering information (note 2) part number case packaging DSR6V600P5-13 powerdi ? 5 5000/tape & reel notes: 1. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied, see eu directive 2002/95/ec annex notes. 2. for packaging details, go to our website at http://www.diodes.com. marking information top view bottom view left pin right pin note: pins left & right must be electrically connected at the printed circuit board. bottomside heat sink s6v600 = product type marking code = manufacturers? code marking yyww = date code marking yy = last two digits of year (ex: 09 for 2009) ww = week code (01 ? 53) k = factory designator yywwk s6v600
dsr6v600p5 document number: ds35211 rev. 5 - 4 2 of 5 www.diodes.com october 2013 ? diodes incorporated dsr6v600p5 powerdi is a registered tradema rk of diodes incorporated. new product part obsolete obsolete ? part discontinued maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol value unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v rm 600 v average rectified output current i o 6 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 55 a thermal characteristics characteristic symbol value unit maximum thermal resistance thermal resistance junction to ambient (note 4) thermal resistance junction to ambient (note 5) r ? ja r ? electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition forward voltage drop v f - 2.5 3.0 v i f = 6a, t j = 25oc leakage current (note 3) i r - 0.2 10 ? a v r = 600v, t j = 25oc reverse recovery time t rr - - 23 ns i f = 0.5a, i r = 1a, i rr = 0.25a - - 35 i f = 1a, v r = 30v, di/dt = 50a/s softness factor s - 0.7 - - i f = 6a, dl/dt = 200a/s, v r = 400v, t j = 125oc reverse recovery current i rm - 3.6 - a reverse recovery charges q r r - 135 - nc junction capacitance c j - 30 - pf v r = 4.0v, 1mhz notes: 3. short duration pulse test used to minimize self-heating effect. 4. fr-4 pcb, 2oz. copper, minimum recomm ended pad layout per http://www.diodes.com. 5. polymide pcb, 2oz. copper. cathode pad dimensions 18.8mm x 14.4mm. anode pad dimensions 5.6mm x 14.4mm. 0 1 2 3 4 5 6 012345 i , average forward current (a) fig. 1 forward power dissipation f(av) p , power dissipation (w) d t = 175c j ? 0.0001 0.001 0.01 0.1 1 10 100 0 0.5 1.0 1.5 2.0 2.5 v , instantaneous forward voltage(v) fig. 2 typical forward characteristics f t = a 25 c ? t = a 85 c ? t = a 125 c ? t = a 150 c ? i , instantaneous forward current (a) f
dsr6v600p5 document number: ds35211 rev. 5 - 4 3 of 5 www.diodes.com october 2013 ? diodes incorporated dsr6v600p5 powerdi is a registered tradema rk of diodes incorporated. new product part obsolete obsolete ? part discontinued 0.01 0.1 1 10 100 1000 0 100 200 300 400 500 600 v , instantaneous reverse voltage(v) fig. 3 typical reverse characteristics r t = a 25 c ? t = a 85 c ? t = a 125 c ? t = 150c a ? i , instantaneous reverse current (a) r 10 100 1000 0.1 1 10 100 v , dc reverse voltage(v) fig. 4 total capacitance vs. reverse voltage r c , junction capacitance (pf) t 0 1 2 3 4 5 6 7 8 9 25 50 75 100 125 150 175 fig. 5 forward current derating curve t , lead temperature (c) l i , average forward current (a) f(av) based on lead temp (t ) l note 5 0 120 240 360 480 600 v , dc reverse voltage (v) r fig. 6 operating temperature derating 0 25 50 75 100 125 175 t , de r a t ed ambie n t t em p e r a t u r e ( c ) a 150
dsr6v600p5 document number: ds35211 rev. 5 - 4 4 of 5 www.diodes.com october 2013 ? diodes incorporated dsr6v600p5 powerdi is a registered tradema rk of diodes incorporated. new product part obsolete obsolete ? part discontinued package outline dimensions suggested pad layout powerdi ? 5 dim min max a 1.05 1.15 a2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 d 3.90 4.05 d2 3.054 typ e 6.40 6.60 e 1.84 typ e1 5.30 5.45 e2 3.549 typ l 0.75 0.95 l1 0.50 0.65 w 1.10 1.41 all dimensions in mm dimensions value (in mm) c 1.840 g 0.852 x 3.360 x1 1.390 y 4.860 y1 1.400 e e1 b1 a a2 a2 d b2 b1 e d2 l e2 l1 w g x c y1 (2x) y x1 (2x)
dsr6v600p5 document number: ds35211 rev. 5 - 4 5 of 5 www.diodes.com october 2013 ? diodes incorporated dsr6v600p5 powerdi is a registered tradema rk of diodes incorporated. new product part obsolete obsolete ? part discontinued important notice diodes incorporated makes no warranty of any kind, express or implied, with regarding to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2011, diodes incorporated www.diodes.com
|
